STIHL Owners Manual - 1 of 100
STIHL Owners Manual - 2 of 100
STIHL Owners Manual - 3 of 100
STIHL Owners Manual - 4 of 100
STIHL Owners Manual - 5 of 100
STIHL Owners Manual - 6 of 100
STIHL Owners Manual - 7 of 100
STIHL Owners Manual - 8 of 100
STIHL Owners Manual - 9 of 100
STIHL Owners Manual - 10 of 100
From inside (document excerpt):
STIHL SR 430, 450 Instruction Manual Manual de instrucciones Warning! Read and follow all safety precautions in Instruction Manual improper use can cause serious or fatal injury. Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones el uso incorrecto puede causar lesiones graves o mortales. Instruction Manual 1 – 46 Manual de instrucciones 47 – 96 English Contents Guide to Using this Manual Safety Precautions and Working Techniques Assembling the Unit Adjusting the Throttle Cable Harness Fuel Fueling Information Before You Start Starting / Stopping the Engine Operating Instructions Metering Unit Dusting and Spreading Mode Calculating Required Quantity of Solution Filling the Container Working After Finishing Work Storing the Machine Engine Management Replacing the Air Filter Adjusting the Carburetor Spark Plug Engine Running Behavior Replacing the Starter Rope and Rewind Spring Inspections and Maintenance by Dealer Maintenance and Care Main Parts Specifications Special Accessories Maintenance and Repairs STIHL Incorporated Federal Emission Control Warranty Statement STIHL Incorporated California Exhaust and Evaporative Emissions Control Warranty Statement Trademarks 41 Allow only persons who fully understand this manual to operate your mistblower.
To receive maximum performance and satisfaction from your STIHL mistblower, it is important that you read and understand and follow the maintenance and safety precautions in chapter “Safety Precautions and Working Techniques ” before using your mistblower. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. Warning! Because a mistblower is a power tool for spraying chemicals, some special safety precautions must be observed as with any other power tool to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Original Instruction Manual 41 43 45 ANDREAS STIHL AG & Co. KG, 2010 0458-454-8621-B. M1.A10.MET. 0000002257_002_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. { SR 430, SR 450 1 English Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N A bullet marks a step or procedure without direct reference to an illustration. Warning! Indicates a hazardous situation which, if not avoided, could result in severe or fatal injury. Caution! Indicates a risk of property damage, including damage to the machine or its individual components. Engineering Improvements STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications and improvements may not be covered in this manual. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Safety Precautions and Working Techniques Because the mistblower is a power tool for spraying chemicals, special safety precautions must be observed to reduce the risk of personal injury. It is important that you read, fully understand and observe the following general safety precautions and warnings. Read the instruction manual and the safety precautions periodically. In addition, read and follow the chemical manufacturer’s instructions for the chemical products being applied. Since such products may vary greatly in handling/application requirements and risks, the product label is normally your best guide for safe and effective use. Use your power tool for spraying chemicals and other liquids to control pests and weeds in fruit, flower and vegetable gardens, on trees and bushes and on other plants, such as coffee, tobacco and cotton. It is also useful in the maintenance of young trees for, e.g., controlling the bark beetle and other pests and plant diseases.