Toro 16585, 16785 Toro Lawnmower Quality of Cut Manual, 1991 - Enlarge page 1 of 57
2 of 57
3 of 57
4 of 57
5 of 57
6 of 57
7 of 57
8 of 57
9 of 57
10 of 57
11 of 57
12 of 57
13 of 57
14 of 57
15 of 57
16 of 57
17 of 57
18 of 57
19 of 57
20 of 57
21 of 57
22 of 57
23 of 57
24 of 57
25 of 57
26 of 57
27 of 57
28 of 57
29 of 57
30 of 57
31 of 57
32 of 57
33 of 57
34 of 57
35 of 57
36 of 57
37 of 57
38 of 57
39 of 57
40 of 57
41 of 57
42 of 57
43 of 57
44 of 57
45 of 57
46 of 57
47 of 57
48 of 57
49 of 57
50 of 57
From inside (document excerpt):
MODEL NO. 16585 – 1000001 & UP MODEL NO. 16785 – 1000001 & UP FORM NO. 3314-554 OPERATOR’S MANUAL 21 ” (0.53 M) HP & SP SIDE DISCHARGE FINGERTIP START This mower “meets or exceeds CPSC blade safety requirements for walk behind rotary mowers ” and the 871.1-1986 specifications of the American National Standards Institute. However, improper use or maintenance by the operator or owner can result in injury. To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety alert symbol A.
Failure to comply with these instructions may result in personal injury. BEFORE OPERATING 1. Read this manual carefully before operating the mower. Become familiar with the controls and proper use of the mower. Never allow children to operate the mower or adults to operate it without proper instructions. 2. Keep everyone, especially children and pets, away from area of operation. Thoroughly inspect area where mower will be used and remove sticks, stones, wire, and debris. 3. Wear long pants and substantial shoes. Do not operate mower while wearing open sandals or when barefoot. 4. Always wear safety glasses or eye shields during operation to protect eyes from foreign objects that may be thrown from the machine. 5. Check fuel level before starting engine. Do not fill fuel tank indoors, when the engine is running, or until engine cools for several minutes after running. Wipe up spilled gasoline before starting engine. 6. Keep all guards, shields, and safety devices in place. Repair or replace defective or damaged parts, including safety decals. Check safety devices before each use or mower.