Craftsman 536.886811 26-Inch Snow Blower Owners Owners Manual - English

IMPORTANT MANUAL DO NOT THROW AWAY OWN R’S UAL Caution: Read and Follow All Safety Rules and Rnstructions Before Operating This Equipment 8 HORSEPOWER 26 ” DUAL STAGE SNOW THROWER OptionaU enectric start o , o o o Assembly Operation Customer Responsibilities Service and Adjustments Repair Parts SEARS, ROEBUCK AND CO., Hoffman Estates, 60179 U.S.A. SAFETY RULES & PLACE WIRE WHERE IT CANNOT CAUTION: ALWAYS DISCONNECT CONTACT SPARK PLUG SPARK PLUG WIRE AND _ IMPORTANT SAFETY STANDARDS REQUIRE OPERATOR PRESENCE CONTROLS TO MINIMIZE THE RISK OF INJURY YOUR SNOW THROWER IS EQUIPPED WITH SUCH CONTROLS.

DO NOT ATTEMPT TO DEFEAT THE FUNCTION OF THE OPERATOR PRESENCE CONTROL UNDER ANY CIRCUMSTANCE& TRAINING 1. Read the operator’s manual carefully. Be thoroughly familiar with the controls and the proper use of the snow thrower. Know how to stop the snow thrower and disengage the controls quickly. Never allow children to operate the snow thrower and keep them away while it is operating, Never allow adults to operate the snow th rower without proper instruction. DO not carry passengers. Keep the area of operation clear of all persons, particularly small children, and pets. Exercise caution to avoid slipping or falling, especially when operating in reverse. 6. Adjust the snow thrower height to clear gravel or crushed rock surfaces. 7o Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by the manufacturer). 8. Let engine (motor) and snow thrower adjust to outdoor temperatures before starting to clear SnOW_ 2. 9. 3. 4. Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the snow thrower. OPERATION 1, Do not put hands or feet near or under rotating parts, Keep clear of the discharge opening at all times, Exercise extreme caution when operating on or crossing gravel drives, walks, or roads° Stay alert for hidden hazards or traffic. PREPARATION 1. Thoroughly inspect the area where the snow thrower is to be used and remove all doormats, sleds, boards, wires, and other foreign objects. Disengage all clutches and shift before starting the engine (motor). into neutral 2. 2. 3. Do not operate the snow thrower without wearing adequate winter outer garments. Wear footwear that will improve tooting on slippery surfaces. Handle fuel with care; it is highly flammable. (a) Use an approved fuel container. 4. 3o After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair thedamagebefore restarting and operating the snow thrower.