Kärcher K 2.900 M Electric Power High Pressure Washer Owners Manual

K 2.900M English Español Français 2 16 30 5.961-668.0 07/05 HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview 3 Important Safety Instructions 4 Assembly Instructions 6 Operating Instructions 7 GFCI Instructions 8 Using the Accessories 8 Working with Detergents 9 Shutting Down & Clean Up 10 Care and Maintenance Instructions 11 Winterizing and Long-Term Storage11 Cleaning Tips 12 Troubleshooting 14 Safety Alert Symbols DANGER indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.” WARNING indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.” CAUTION indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury” or in property damage incidents.

Specifications Operating pressure Water volume Amp draw Voltage Part No. Serial no. 1550 PSI 1.2 GPM 13 AMPS 120 V 1.671-343.0 Kärcher Customer Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com/home Please take a moment to register your presure washer online at www.karcher-usa.com/warranty 2 English MODEL OVERVIEW On/OFF switch High pressure outlet Detergent suction tube with filter Dirtblaster® (Rotating spray wand) Vario Power Spray wand Trigger gun Trigger gun safety lock High pressure hose Water inlet with garden hose connector 10 Power cord with Ground Fault Circuit Interrupter (GFCI) 11 Trigger Gun Holder Spray Wand Storage Handle Collapsable transport handle Hose/Cord Caddy CAUTION This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. For household use only! English 3 IMPORTANT SAFETY INSTRUCTIONS WARNING When using this product basic precautions should always be followed, including the following: Read all the instructions before using the product. To reduce the risk of injury, close supervision is necessary when a product is used near children. Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls. Stay alert ­ watch what you are doing. Do not operate the product when fatigued or under the influence of alcohol or drugs. Keep operating area clear of all persons. Do not overreach or stand on unstable support. Keep good footing and balance at all times. Follow the maintenance instructions specified in the manual. This Product Is Provided With A Ground Fault Circuit Interrupter Built Into The Power Cord Plug. If Replacement Of The Plug Or Cord Is Needed, Use Only Identical Replacement Parts. Risk of Injection or Injury ­ Do Not Direct Discharge Stream At Persons. High pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the machine itself. Wear safety goggles. Do not use acids and solvents in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. The Trigger Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the ON position. Do not use extension cord with this unit. SAVE THESE INSTRUCTIONS 4 English GROUND FAULT CIRCUIT INTERRUPTER PROTECTION This product is supplied with a Ground Fault Circuit Interrupter (GFCI) built into the power cord plug. This device provides additional protection from the risk of electric shock. If power is interrupted in the line, the GFCI will automatically re-close the circuit to the load after power is restored. Depending on the GFCI model, it may be necessary to manually operate the reset button to restore power to the GFCI load circuit. If replacement of the plug or cord is needed use identical replacement parts. WATER SUPPLY (Cold Water Only) CAUTION When connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be connected directly to the public drinking water supply. This is to ensure that there is no feedback of chemicals into the water supply. Direct connection via a receiver tank or backflow preventer, for example, is permitted. Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter. Garden hose must be at least 5/8 inch in diameter. Flow rate of water supply must not fall below 2 GPM (gallons per minute). Flow rate can be determined by running the water for one minute into an empty 5-gallon container. The water supply temperature must not exceed 104°F/40°C. Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. Always prevent debris from being drawn into the unit by using a clean water source.