STIHL HT 250 Cultivator Owners Owners Manual - English

STIHL HT 250 Instruction Manual Manual de instrucciones Warning! Read and follow all safety precautions in Instruction Manual ­ improper use can cause serious or fatal injury. Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones ­ el uso incorrecto puede causar lesiones graves o mortales. English / USA Contents Allow only persons who understand this manual to operate your pole pruner. To receive maximum performance and satisfaction from your STIHL pole pruner, it is important that you read and understand the maintenance and safety precautions, starting on page 3, before using your pole pruner.

Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. ANDREAS STIHL AG & Co. KG, 2007 0458 275 8621 A. M0,5. D7. PM. Printed in USA Guide to Using this Manual 2 Safety Precautions and Working Techniques . 3 Using the Pole Pruner 15 Mounting the Bar and Chain . 18 Tensioning the Saw Chain 19 Checking Chain Tension . 19 Adjusting the Throttle Cable . 19 Fuel 20 Fueling 21 Chain Lubricant 22 Filling Chain Oil Tank 22 Checking Chain Lubrication . 23 Fitting the Harness . 23 Starting / Stopping the Engine . 24 Operating Instructions 27 Taking Care of Guide Bar . 28 Replacing the Air Filter . 29 Motor Management 29 Adjusting the Carburetor 30 Checking the Spark Plug 31 Engine Running Behavior . 32 Replacing Starter Rope and Rewind Spring . 33 Storing the Machine 35 Checking and Replacing the Chain Sprocket . 35 Maintaining and Sharpening Saw Chain 36 Maintenance Chart . Main Parts and Controls . Specifications . Special Accessories . Maintenance and Repairs STIHL Incorporated Federal Emission Control Warranty Statement Trademarks BA_SE_192_001_01_02.fm 40 42 44 45 45 46 48 Printed on chlorine-free paper. Printing inks contain vegetable oils; paper can be recycled. !Warning! Because a pole pruner is a high-speed cutting tool with a very long reach some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your pole pruner differ from those described in this manual, please contact your STIHL dealer for information and assistance. STIHl HT 250 1 English / USA Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. The operating and handling instructions are supported by illustrations. In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols described below: Warning where there is a risk of an accident or personal injury or serious damage to property. Caution where there is a risk of damaging the machine or its individual components. Note or hint which is not essential for using the machine, but may improve the operator’s understanding of the situation and result in better use of the machine. Note or hint on correct procedure in order to avoid damage to the environment. Equipment and features This instruction manual may refer to several models with different features. Components that are not installed on all models and related applications are marked with an asterisk (*). Such components may be available as special accessories from your STIHL dealer. Symbols in text The individual steps or procedures described in the manual may be marked in different ways: : A bullet marks a step or procedure without direct reference to an illustration. Engineering improvements STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Therefore some changes, modifications and improvements may not be covered in this manual. A description of a step or procedure that refers directly to an illustration may contain item numbers that appear in the illustration. Example: Loosen the screw (1) Lever (2). 2 HT 250 English / USA Safety Precautions and Working Techniques Because a pole pruner is a high-speed, fast-cutting power tool with a very long reach, special safety precautions must be observed to reduce the risk of personal injury. It is important that you read, fully understand and observe the following safety precautions and warnings. Read the instruction manual and the safety precautions periodically. Careless or improper use may cause serious or fatal injury. Have your STIHL dealer show you how to operate your power tool. Observe all applicable local safety regulations, standards and ordinances. Do not cut any material other than wood or wooden objects. Use your pole pruner for limbing only. It must not be used for any other purposes, since such misuse may result in an accident or damage to the machine. THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol, etc.) which might impair vision, dexterity or judgment. Do not operate this machine when you are fatigued. !Warning! Minors should never be allowed to use this power tool. Bystanders, especially children, and animals should not be allowed in the area where it is in use. !Warning! Be alert ­ if you get tired, take a break. Tiredness may result in loss of control. Working with any power tool can be strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before operating this machine.