Poulan 96194000300 406888 10.5HP Electric Start Dual Stage Snow Blower Owners Manual, 2007

Owner’s Manual Snow Thrower 10.5 Horsepower Electric Start Dual Stage Model 96194000300 CAUTION: Before using this product, read this manual and follow all of its Safety Rules and Operating Instructions. Manual del usario Quitanieves 10.5 caballos de fuerza (hp) Bietápico Arranque eléctrico Modelo 96194000300 PRECAUCIÓN: Antes de usar este producto, lea este manual y siga todas las reglas de seguridad e instrucciones de operación. 406888 REV2 02/21/07 Printed in U.S.A 1 2 GENERAL INFORMATION This instruction book is written for a person with some mechanical ability.

Snow Blower and Snow Thrower User Manual Free Download. Snow Removal Operator’s Manual. Free Instruction Manual Download PDF. Revision: 2007.

Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit. Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instructions and the safety rules. Keep this manual for future reference. IMPORTANT: Many units are not assembled and are sold in cartons. It is the responsibility of the owner to make sure the assembly instructions in this manual are exactly followed. Other units are purchased in an assembled condition. On assembled units, it is the responsibility of the owner to make sure the unit is correctly assembled. The owner must carefully check the unit according to the instructions in this manual before it is first used. GB Controls & Equipment Features (see Figure 1) Crank Assembly (2) – Changes the direction of the discharge chute. Chute Deflector (3) – Changes the distance the snow is thrown. Discharge Chute (4) – Changes the direction the snow is thrown. Auger Drive Lever (5) – Starts and stops the auger (snow gathering and throwing) which also propels the snowthrower Engine Features Stop Switch (8) – If equipped, move to the ON position to start the engine. Primer Button (9) – Injects fuel directly into the carburetor for fast starts in cold weather. Recoil Starter Handle (12) – Use to manually start the engine. Choke Control (14) – Use to start a cold engine. – Declared vibration emission values in accordance with Directive 98/37/EC. Vibration Emission according to EN 1033;1996: 2,5 m/s2. Values determined at the handle when the machine was operated stationary on a concrete surface at 3700 min-1. Declared airborne noise emissions of LwA 108 dB is in accordance with Directive 2000/14/EC, Annex V. Sound Pressure Level at operator position 89 dB. Values determined at ear according to the specifications of EN ISO 11201. Declared airborne sound power level of 108 dB(A) is in accordance with Directive 2000/14/EC. 3 This manual contains safety information to make you aware of the hazards and risks associated with snow throwers, and how to avoid them. The snow thrower is designed and intended for removal of snow, and should not be used for any other purpose. It is important that you read and understand these instructions, and anyone operating the equipment read and understand these instructions. Operating Symbols and their meanings GB These symbols are used on your equipment and defined in your operating manual. It is important that you review and understand the meanings. Failure to understand the symbols might result in harm to you. Oil Fuel Foward WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may be used to represent the type of hazard. DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION, when used without the alert symbol, indicates a situation that could result in damage to the equipment. On Off Neutral Primer bulb Reverse Throttle Ignition On Choke off Ignition Off Choke on Ignition Key Stop Push to engage electric start Electric Start Engine Start Engine Run Hazard Symbols and the meanings These symbols are used on your equipment and defined in your operating manual. Review and understand the meanings. The use of one of these symbols combined with a signal word will alert you to potential hazards and how to avoid them. Safety Alert — Identifies safety information about hazards that can result in personal injury. Operator’s Manual — Read and understand before performing any activity or running equipment. Rotating auger Fire Engage Slow Fast Engage Rotating impeller Explosion Traction Engine Off Toxic fumes Shock Hot Surface Never reach into rotating parts. Recommended ear protection for extended use. Auger Collector Auger Clutch Drive Clutch Discharge Chute Engage Disengage Heated Grips Chute Deflector Rotating gears Thrown objects Keep a safe distance from the equipment. Shut off engine and remove spark plug connector before performing maintenance or repair work. LEFT RIGHT UP DOWN 4 GB WARNING: This machine is capable ofto amputating hands and feet and throwing objects. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed. Safe Operation Practices for Snowthrowers IMPORTANT: Safety standards require operator presence controls to minimize the risk of injury. Your snowthrower is equipped with such controls. Do not attempt to defeat the function of the operator presence control under any circumstances. Operation 1. Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. 2. Exercise extreme caution when operating on or crossing gravel drives, walks or roads. Stay alert for hidden hazards or traffic. 3. After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect snowthrower for any damage, and repair the damage before restarting and operating the snowthrower. 4. If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble. 5. Stop the engine (motor) whenever you leave the operating position, before unclogging the collector/impeller housing or discharge chute and when making any repairs, adjustments, or inspections. 6. When cleaning, repairing, or inspecting, make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting. 7. Do not run the engine indoors, except when starting the engine and for transporting the snowthrower in or out of the building. Open the outside doors; exhaust fumes are dangerous (containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS). 8. Exercise extreme caution when operating on slopes. Do not attempt to clear steep slopes. 9. Never operate the snowthrower without proper guards, plates, or other safety protective devices in place and working. 10. Never direct the discharge toward people or areas where property damage can occur. Keep children and others away. 11. Do not overload the machine capacity by attempting to clear snow at too fast a rate. 12. Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse. 13. Disengage power to the collector/impeller when snowthrower is transported or not in use. 14. Use only attachments and accessories approved by the manufacturer of the snowthrower (such as cabs, tire chains, etc ). 15. Never operate the snowthrower without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run. 16. Never touch a hot engine or muffler. 17. Never operate the snowthrower near glass enclosures, automobiles, window wells, drop–offs, and the like without proper adjustment of the snow discharge angle. 18. Never direct discharge at bystanders or allow anyone in front of the unit. 19. Never leave a running unit unattended. Always disengage the auger and traction controls, stop engine, and remove keys. 20. Do not operate the unit while under the influence of alcohol or drugs. 21. Keep in mind the operator is responsible for accidents occurring to other people or property. 22. Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment–related injuries. These operators should evaluate their ability to operate the unit safely enough to protect themselves and others from injury. 23. DO NOT wear long scarves or loose clothing that could become entangled in moving parts. 24. Snow can hide obstacles. Make sure to remove all obstacles from the area to be cleared. Training 1. Read, understand, and follow all instructions on the machine and in the manuals before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. 2. Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction. 3. Keep the area of operation clear of all persons, particularly small children and pets. 4. Exercise caution to avoid slipping or falling especially when operating in reverse. Preparation 1. Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects. 2. Disengage all clutches and shift into neutral before starting the engine (motor). 3. Do not operate the equipment without wearing adequate winter outer garments. Wear footwear that will improve footing on slippery surfaces. Avoid loose fitting clothing that can get caught in moving parts. 4. Handle fuel with care; it is highly flammable. a. Use an approved fuel container. b. Never add fuel to a running engine or hot engine. c. Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. Replace fuel cap securely and wipe up spilled fuel. d. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling. e. When practical, remove gas–powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such on a trailer with a portable container, rather than from a gasoline dispenser nozzle. f. Keep nozzle in contact with the rim of the fuel tank or container opening at all times, until refueling is complete. Do not use a nozzle lock–open device. g. Replace gasoline cap securely and wipe up spilled fuel. h. If fuel is spilled on clothing, change clothing immediately. 5. Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors. 6. Adjust the collector housing height to clear gravel or crushed rock surfaces. 7. Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer). 8. Let engine (motor) and snowthrower adjust to outdoor temperatures before starting to clear snow. 9. Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Wikipedia’s page for Poulan

Publisher: www.poulan.com