Toro Owners Manual, 2011 - Enlarge page 1 of 36
2 of 36
3 of 36
4 of 36
5 of 36
6 of 36
7 of 36
8 of 36
9 of 36
10 of 36
11 of 36
12 of 36
13 of 36
14 of 36
15 of 36
16 of 36
17 of 36
18 of 36
19 of 36
20 of 36
21 of 36
22 of 36
23 of 36
24 of 36
25 of 36
26 of 36
27 of 36
28 of 36
29 of 36
30 of 36
31 of 36
32 of 36
33 of 36
34 of 36
35 of 36
36 of 36
From inside (document excerpt):
Form No. 3367-417 Rev A Greensmaster® 1000 and 1600 Walk-Behind Mower Model No. 04052–Serial No. 311000001 and Up Model No. 04060–Serial No. 311000001 and Up To register your product or download an Operator’s Manual or Parts Catalog at no charge, go to www.Toro.com. Original Instructions (EN) This product complies with all relevant European directives, for details please see the separate product specific Declaration of Conformity (DOC) sheet. Figure 1 WARNING CALIFORNIA Proposition 65 Warning The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
This spark ignition system complies with Canadian ICES-002. 1. Safety alert symbol. This manual uses two other words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. Introduction This machine is a walk behind, reel-blade lawnmower intended to be used by professional, hired operators in commercial applications. It is primarily designed for cutting grass on well-maintained lawns in parks, golf courses, sports fields, and on commercial grounds. It is not designed for cutting brush, mowing grass and other growth alongside highways, or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. The model and serial numbers are located on a plate on the rear frame. Write the numbers in the space provided. Model No. Serial No. This manual identifies potential hazards and has safety messages identified by the safety alert symbol (Figure 1), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions. 2010–The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Contact us at www.Toro.com. Printed in the USA. 2 Contents Introduction . 2 Safety . 4 Safe Operating Practices . 4 Toro Mower Safety . 5 Sound Power Level (Model 04052) 6 Sound Power Level (Model 04060) 6 Sound Pressure Level . 6 Vibration Level 6 Safety and Instructional Decals . 7 Setup 9 1 Installing and Adjusting the Handle 9 2 Installing the Kickstand (Model 04060 Only) 10 3 Installing the Transport Wheels 10 4 Adjusting the Cutting Unit . 11 5 Installing the Grass Basket . 11 Product Overview 12 Controls . 12 Specifications . 13 Attachments/Accessories . 13 Operation . 14 Think Safety First . 14 Checking the Engine Oil Level 14 Filling the Fuel Tank . 14 Checking the Interlock Switch Operation 15 Starting and Stopping the Engine 15 Driving the Machine in Transport . 16 Preparing to Mow . 16 Mowing 16 Operating Tips . 16 Maintenance . 17 Recommended Maintenance Schedule(s) 17 Daily Maintenance Checklist . 18 Lubrication . 19 Greasing the Machine . 19 Engine Maintenance . 20 Servicing the Engine Oil . 20 Servicing the Air Cleaner 21 Replacing the Spark Plug 21 Fuel System Maintenance . 22 Cleaning the Fuel Filter . 22 Electrical System Maintenance 23 Servicing the Interlock Switch 23 Brake Maintenance . 23 Adjusting the Service/Parking Brake . 23 Belt Maintenance 24 Adjusting the Belts . 24 Replacing the Differential Belt 26 Controls System Maintenance . 27 Adjusting the Traction Control . 27 Cutting Unit Maintenance . 27 Leveling the Rear Drum to the Reel . 27 Adjusting the Bedknife to the Reel 28 Adjusting the Height of Cut 28 Adjusting the Grass Shield Height . 29 Adjusting the Cut-Off Bar 30 Bedbar Identification 30 Setting the Machine to Match Turf Conditions . 31 Servicing the Bedbar . 32 Backlapping the Reel 32 Storage . 33 3 Safety This machine meets or exceeds CEN standard EN 836:1997, ISO standard 5395:1990, and ANSI B71.4-2004 specifications in effect at the time of production when the Operator Presence Kit, Part No. 1055363 is installed. Improper use or maintenance by the operator or owner can result in injury. To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety alert symbol, which means Caution, Warning, or Danger–personal safety instruction. Failure to comply with the instruction may result in personal injury or death. · Warning–Fuel is highly flammable. Take the following precautions: Store fuel in containers specifically designed for this purpose. Refuel outdoors only and do not smoke while refuelling.
Wikipedia’s page for Toro Company
Company Web Site: www.toro.com