Craftsman C950.52930 0 31-Inch Snow Blower Owners Owners Manual - English

SWARS owner’s manual Model C950-52930-0 11-H.P. 31 inch DUAL STAG SNOW BLOWER CAUTION: You must read and understand manual unit. this owner’s before operating Serial No. F-001008J 12/13/99 SEARS CANADA INC., TORONTO, ONTARIO M5B 2B8 Printed inU.S.A. RULES FOR SAFE OPERATION IMPORTANT _1 spark plug to prevent accidentalthe spark plug wire and place it where it cannot Storagecontact with starting during: Preparation, Maintenance, or make of your ARNING: Always disconnect snow blower. SAFE OPERATION PRACTICES FOR WALK-BEHIND SNOW BLOWER DO NOT OPERATE THIS EQUIPMENT BEFORE READING THIS MANUAL.

For all units with electric starting motors use electric starting extension cords certified CSA/UL. Use only with a receptacle that has been installed in accordance with local inspection authorities. Adjust the auger housing crushed rock surface. height to clear gravel or 6. 7. Under no circumstances should any adjustments be made while the engine is running (except when specifically recommended by manufacturer). Let engine and machine adjust to outdoor temperatures before starting to clear snow. Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.. TRAINING 1. Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction. Keep the area of operation clear of all persons, particularly small children and pets. Exercise caution to avoid slipping or falling especially when operating in reverse. 9. OPERATION 2. 1. 2. Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. Exercise extreme caution when operating on or crossing gravel drives, walks or roads. Stay alert for hidden hazards or traffic. Never discharge snow onto public roads or near moving traffic. After striking a foreign object, stop the engine, remove the wire from the spark plug, thoroughly inspect snow blower for any damage, and repair the damage before restarting and operating the snow blower. If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble. Stop the engine and remove spark plug wire whenever you leave the operating position, before unclogging the augedlmpeller housing or discharge chute and when making any repairs, adjustments, or inspections. When cleaning, repairing, or inspecting, make certain the auger/Impeller and all moving parts have stopped and all controls are disengaged. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting. Take all possible precautions when leaving the snow blower unattended. Disengage the auger/impeller, shift to neutral, stop engine, and remove key. 3. 4. 3. 4. PREPARATION 1. Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects. Disengage all clutches before starting the engine. Do not operate the equipment without wearing adequate winter outer garments. Wear footwear that will improve footing on slippery surfaces. Handle fuel with care; it is highly flammable. (a) Use an approved fuel container.