Kärcher Owners Manual - Enlarge page 1 of 45
2 of 45
3 of 45
4 of 45
5 of 45
6 of 45
7 of 45
8 of 45
9 of 45
10 of 45
11 of 45
12 of 45
13 of 45
14 of 45
15 of 45
16 of 45
17 of 45
18 of 45
19 of 45
20 of 45
21 of 45
22 of 45
23 of 45
24 of 45
25 of 45
26 of 45
27 of 45
28 of 45
29 of 45
30 of 45
31 of 45
32 of 45
33 of 45
34 of 45
35 of 45
36 of 45
37 of 45
38 of 45
39 of 45
40 of 45
41 of 45
42 of 45
43 of 45
44 of 45
45 of 45
From inside (document excerpt):
K 2.55 English Español Français 2 15 28 9.760-071.0 07/05 HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview 3 Important Safety Instructions 4 Assembly Instructions 5 Operating Instructions 6 GFCI Instructions 7 Using the Accessories 7 Working with Detergents 8 Taking a Break five minutes or more9 Shutting Down & Clean-Up 9 Winterizing and Long-Term Storage10 Care and Maintenance Instructions 10 Cleaning Tips 11 Troubleshooting 13 Safety Alert Symbols DANGER Specifications Operating pressure Water volume Amp draw Voltage Part No.
Serial no. Kärcher Customer Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com/home Please take a moment to register your presure washer online at www.karcher-usa.com/warranty Kärcher Customer Service CDN Call: 1-800-465-4980 for help or visit our website: www.karcher.ca Kärcher Customer Support Mexico Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx 1400 PSI 1.3 GPM 13 AMPS 120 V 1.601-501.0 indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.” WARNING indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.” CAUTION indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury” or in property damage incidents. 2 English MODEL OVERVIEW 1 Power cord with Ground Fault Circuit Interrupter (GFCI) 2 On/OFF switch 3 Trigger gun safety lock 4 High pressure hose 5 Trigger gun 6 Wash brush 7 Vario Power Spray wand 8 Water inlet with garden hose connector 9 Detergent suction tube with filter 10 High pressure outlet 11 Connector for detergent suction tube For household use only! English 3 IMPORTANT SAFETY INSTRUCTIONS WARNING! When using this product basic precautions should always be followed, including the following: ! Read all the instructions before using the product. ! To reduce the risk of injury, close supervision is necessary when a product is used near children. ! Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls. ! Stay alert watch what you are doing. ! Do not operate the product when fatigued or under the influence of alcohol or drugs. ! Keep operating area clear of all persons. ! Do not overreach or stand on unstable support. Keep good footing and balance at all times. ! Follow the maintenance instructions specified in the manual. ! This Product Is Provided With A Ground Fault Circuit Interrupter Built Into The Power Cord Plug. If Replacement Of The Plug Or Cord Is Needed, Use Only Identical Replacement Parts. ! Risk of Injection or Injury Do Not Direct Discharge Stream At Persons. ! High pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the machine itself. ! Wear safety goggles. ! Do not use acids and solvents in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. ! To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. ! The Trigger Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the ON position. ! Do not use extension cord with this unit. WARNING To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. SERVICING OF A DOUBLEINSULATED PRODUCT In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A doubleinsulated product is marked with the words “double-insulation ” or “double-insulated “. The symbol “! ” may also be marked on the product.