STIHL MS 362C Q Chainsaw Owners Owners Manual - English

STIHL MS 362 C-Q Instruction Manual Manual de instrucciones Warning! To reduce the risk of kickback injury use STIHL reduced kickback bar and STIHL RMC3 or RSC3 (3/8 “) chain depending on sprocket pitch or other available low kickback components. Advertencia! Para reducir el riesgo de lesionarse como resultado de un culatazo, utilice la barra de contragolpe reducido y la cadena RMC3 o RSC3 (3/8 pulg) de STIHL, dependiendo de la rueda dentada usada y de otros componentes reductores de contragolpe.

Read and follow all safety precautions in Instruction Manual ­ improper use can cause serious or fatal injury. Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones ­ el uso incorrecto puede causar lesiones graves o mortales. Instruction Manual 1 – 58 Manual de instrucciones 59 – 120 English Contents Secondary Chain Braking System Guide to Using this Manual Safety Precautions and Working Techniques Cutting Attachment Mounting the Bar and Chain Tensioning the Chain Check Chain Tension Fuel Fueling Chain Lubricant Filling Chain Oil Tank Checking Chain Lubrication Chain Brake Winter Operation Starting / Stopping the Engine Operating Instructions Oil Quantity Control Taking Care of the Guide Bar Air Filter System Cleaning the Air Filter Engine Management Adjusting the Carburetor Spark Arresting Screen in Muffler Spark Plug Replacing the Starter Rope and Rewind Spring Storing the Machine Checking and Replacing the Chain Sprocket Maintaining and Sharpening the Saw Chain Maintenance and Care Main Parts Specifications Special Accessories Ordering Spare Parts Maintenance and Repairs STIHL Incorporated Federal Emission Control Warranty Statement Trademarks 49 51 53 54 54 55 Allow only persons who fully understand this Manual to operate your chain saw. To receive maximum performance and satisfaction from your STIHL chain saw, it is important that you read and understand and follow the maintenance and safety precautions in chapter “Safety Precautions and Working Techniques ” before using your chain saw. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. Warning! Because a chain saw is a high-speed wood-cutting tool, some special safety precautions must be observed as with any other power saw to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements may be made from time-to-time. If the operating characteristics or the appearance of your chain saw differs from those described in this manual, please contact your STIHL dealer for information and assistance. Original Instruction Manual 55 57 ANDREAS STIHL AG & Co. KG, 2009 0458-543-8621-A. M1-1.C9.PM. 0000001281_003_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. { MS 362 C 1 English Secondary Chain Braking System This STIHL chain saw is equipped with a chain brake system that can be activated in three different ways. As before, the chain brake can be activated by the inertia of the front hand guard in certain kickback situations or manually by pushing the front hand guard toward the bar nose. In both of these cases the brake, once activated, is designed to bring the chain to a standstill within fractions of a second. In addition, there is a secondary system that is designed to stop chain rotation within a second of you letting go of the rear handle. The locked chain is not released again until you press down the throttle trigger lockout lever to operate the throttle. The chain brake can be activated in three ways: Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. 3 Manually by releasing the rear handle Symbols in text The operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N The activating mechanism for the secondary chain braking system is integrated in the throttle trigger lockout lever (rear handle). One of the big advantages of this system is that the saw chain is automatically locked in position for engine starts and when carrying the running saw by the front handle (with the rear handle released).