Toro 2001 Bidding Specs Catalog - Enlarge page 1 of 2
2 of 2
From inside (document excerpt):
2001 Series With an adjustable arc and a color-coded nozzle tree, the 2001 Series sprinkler takes you to a new level of convenience in design, installation and maintenance. Specifying Information X Optional S–Stainless-Steel 2001 Arc X X Optional E–Effluent Indicator Cap Blank–Adjustable Arc, 30360° F–Full-Circle, 360° For Example: When specifying a stainless-steel 2001 Series Sprinkler with an adjustable arc and effluent indicator cap, you would specify: S2001E TO RO 2001 S2001 s TO RO 200 LIF 1 T 200 LIF 1 T Specification s Bidding Specifications The full- or part-circle sprinklers shall be a gear-driven rotary type.
The sprinkler shall be of a pop-up design with an overall height of 81/2 “, a body diameter of 21/2 “, a cap diameter of 3.38 ” and having a pop-up stroke of 4 “. The sprinkler shall be mounted at finished grade and shall have a 1 ” NPT or BSP female threaded inlet. The sprinkler shall be capable of covering __ feet radius at _ pounds per square inch pressure with a discharge rate of __ gallons per minute. Water distribution shall be via two (2) nozzles that thread into a 2 ” diameter nozzle turret. The dual color-coded nozzles shall elevate 4 ” when in operation. The body of the sprinkler shall be injection molded from ABS, a non-corrosive, impact-resistant, UV-resistant, heavy-duty plastic material. The cover and nozzle top shall be injection molded from Alcryn§, a synthetic rubber, and be capable of providing excellent impact resistance. The sprinkler shall be available with a plastic or stainless-steel riser. The sprinkler shall have a plastic filter screen sized to prevent entry of foreign material into the nozzle. All components shall be removable from the top of the sprinkler case via a snap ring retention method. The sprinkler shall have a singlepiece riser/body seal that regulates flushing during pop-up and retraction to clear any debris from around the riser and a heavy-duty stainless-steel spring to ensure positive retraction. Rotation shall be accomplished by a water-lubricated planetary gear-drive (continued) s s s s s s s Radius: 48’71′ Flow Rate: 5.631.3 GPM Operating pressure range: 40100 PSI Recommended operating pressure range: 60 PSI Nozzle variations: Five (6, 9, 12, 18 and 24) Dual nozzle rotating stream pattern Full-circle (360°) or adjustable part-circle (30°360°) models available Check valve standard Maintains 10′ elevation change Rubber cover standard Stainless-steel model available Arc memory Color-coded nozzles Effluent indicator cap available Precipitation rate: .221.5 in./hour Inlet size: 1 ” NPT or BSP female thread Exposed surface: 3.38 ” Trajectory: 25° Apex: # 6 nozzle @ 60 psi — 11’6 ” @ 30′ # 9 nozzle @ 60 psi — 13’10 ” @ 40′ #12 nozzle @ 60 psi — 13’5 ” @ 40′ #18 nozzle @ 60 psi — 14’2 ” @ 40′ #24 nozzle @ 60 psi — 15’0 ” @ 40′ 2001 1 Height: 8 /2 ” 1 Body Diameter: 2 /2 ” Pop-up to nozzle: 4 ” Weight: 1 lb. S2001 1 Height: 8 /2 ” 1 Body Diameter: 2 /2 ” Pop-up to nozzle: 4 ” Weight: 1 lb., 1 oz. SEPTEMBER 2000 2001 Series Bidding Specifications (cont.) Recommended Installation Instructions assembly driven by a variable reversing stator that maintains a constant speed of rotation with all nozzles. The variable reversing stator shall require no adjustments when changing nozzles. The sprinkler shall incorporate an anti-vandal arc memory feature that allows the nozzle to be turned beyond its watering borders without incurring any internal damage. If turned beyond its watering borders, the sprinkler shall automatically return to the previously set arc. The sprinkler shall have a standard rubber cover available in black, or lavender for effluent water use applications. The 2001 Series sprinkler is specifically designed for medium and large turf applications where performance, flexibility and ease of installation and maintenance are issues of primary concern. Its standard rubber cover makes it ideal for sports field applications as well as parks, schools or any other medium or large turf areas where liability may be an issue. It is recommended that 2001 sprinklers be installed on swing joints or on large size flexible poly pipe with the necessary saddles, elbows and clamps. Swing joints should be specified as triple swing joints, allowing movement up and down, laterally, or at an angle to the plane of The sprinkler shall be developed and installation. Note that Toro Super manufactured by an ISO 9001-certified Funny Pipe cannot be used as it will facility. The sprinkler shall be a model not accommodate adequate flow in the number _ and sizes available. shall be manufactured by The Toro Sprinklers of one common arc and Company, Irrigation Division, Riverside, nozzle valved together will provide California, USA. matched precipitation rates. Where various arcs are valved together, appropriate nozzles should be specified to ensure matched or balanced precipitation rates. The 2001 nozzles are engineered to provide a smooth, consistent curtain of water across the arc. Provision is made for at-head coverage. Nozzles are threaded into a nozzle turret. The white inner nozzle should be installed with the #6 and #9 long-range nozzles. The red inner nozzle should be installed with the #12, #18 and #24 nozzles. Accordingly, it is recommended that sprinklers be located 2 ” from walks, curbs, hardscaping, mow strips, header boards and edges of lawn. In addition, sprinklers should be placed 6 “12 ” from buildings. Such location will allow normal maintenance procedures such as mowing to be accomplished and also minimize spray on buildings. Nozzle Performance Information 2001 Nozzles NOZZLE SET 6 (YELLOW) psi 40 50 60 70 80 90 100 RAD GPM 48′ 50′ 51′ 52′ 54′ 55′ 56′ 5.6 6.5 7.1 7.7 8.3 8.9 9.4 NOZZLE SET 9 (ORANGE) NOZZLE SET 12 (BROWN) NOZZLE SET 15 (BLACK) NOZZLE SET 18 (BLUE) NOZZLE SET 24 (GREEN) Prec. Rate * Prec. Rate * Prec. Rate * Prec. Rate * Prec. Rate * Prec. Rate * v s RAD GPM v s RAD GPM v s RAD GPM v s RAD GPM v s RAD GPM
Wikipedia’s page for Toro Company
Company Web Site: www.toro.com