Toro Owners Manual - Enlarge page 1 of 2
2 of 2
From inside (document excerpt):
835S Series Sprinklers Specifying Information–835S Series Sprinklers 835S Body Inlet Arc Body Threads X Nozzle X X Pressure Regulation* Optional Valve Type 3–1 ” 5–Full and 0–NPT Part circle 4–ACME 5–BSP 1–NO Hydraulic 2–Check-O-Matic 6–Electric 30 31 32 33 34 35 36 37 6–65 psi (4,5 Bar) 8–80 psi (5,5 Bar) 1–100 psi (6,9 Bar) EEffluent DLDecoder NNi Plated Sol. Example: When specifying a 835S Series Sprinkler with ACME threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: 835S46346 *Electric models only.
Lawn Sprinkler User Manual Free Download. Irrigation Free Instruction Manual Download PDF.
Not all models are available. All electric models are equipped with a selectable pilot valve that provides settings at 50, 65, 80 and 100 psi (3,4, 4,5, 5,5 or 6,9 Bar). Specifications · Radius: 42’92′ (12,828m) · Flow rate: 7.145.3 GPM (26,9171,5 LPM) · Arc: Bidirectional, part-circle rotation, adjustable from 40°330°, and true unidirectional 360° full-circle rotation. · Pilot valve selectable at: 50, 65, 80 or 100 psi (3,5, 4,5, 5,5 or 6,9 Bar) · Recommended operating pressure range: 65100 psi (4,56,9 Bar) · Maximum pressure: 150 psi (10,3 Bar) · Minimum pressure: 40 psi (2,8 Bar) · Activation options: · Electric valve-in-head · Normally open valve-in-head · Check-O-Matic: checks 37′ (11,3m) of elevation change · Electric valve-in-head solenoid: 24 VAC, 50/60 Hz · Inrush: 0.12 A · Holding: 0.10 A · Stator variations: 2 · Inlet size: 1 ” (25mm) NPT, BSP or ACME · Body height: 10 ” (254mm) · Body flange diameter: 6 1/2 ” (165,1mm) · Pop-up height to nozzle: 3 1/4 ” (83mm) · Pop-up height overall: 4 3/16 ” (106,4mm) · Weight: 2.98 lbs. (1,4 kg) · Nozzle Variations: 8 (30, 31, 32, 33, 34, 35, 36 and 37) · Three in-line nozzles with rotating stream pattern · Precipitation rates: · Minimum: .37 “/hr. (9,4mm/hr) · Maximum: .66 “/hr. (16,8mm/hr) · Trajectory: adjustable from 7°30° in 1° increments (24 positions) · Apex (at distance from sprinkler): (65 psi [4,5 Bar] @ 25° trajectory) 31 – 11′ (3,4m) at 33′ (10,1m) 32 – 12′ (3,7m) at 34′ (10,4m) 33 – 13′ (4,0m) at 35′ (10,7m) 34 – 14′ (4,3m) at 39′ (11,9m) 35 – 15′ (4,6m) at 43′ (13,1m) (80 psi [5,5 Bar] @ 25° trajectory) 36 – 17′ (5,2m) at 45′ (13,7m) 37 – 18′ (5,5m) at 45′ (13,7m) Bidding Specifications The sprinkler shall be capable of fulland part-circle operation and be a geardriven rotary type. The sprinkler shall be of a pop-up design with an overall height of 10 ” (254mm), a body flange diameter of 61/2 ” (165,1mm), a cap diameter of 3 3/8 ” (85,7mm) and a pop-up height of 4 3/16 ” (106,4mm). The sprinkler shall have a 1 ” (25mm) NPT, BSP or ACME female-threaded inlet. The sprinkler shall be capable of covering feet radius at pounds per square inch pressure with a discharge rate of gallons per minute. Water distribution shall be via three nozzles mounted in a 2 1/4 ” (57mm) diameter plastic nozzle turret. The three nozzles shall be oriented in the same direction and elevate 3 1/4 ” (83mm) above the body when in operation. All of the sprinkler nozzles shall be of a thread-in type and color-coded for easy identification of radius and gallonage performance capabilities. All nozzles shall be sized to allow any particle capable of passing through the riser screen to pass through the nozzle.