From inside (document excerpt):
English Quick Reference Guide · For Outdoor Cabinet Models · Use this guide for quick reference when you want to: Change Time and Day or Date . page 2 Review or Change Watering Day Schedule pages 2-3 Review or Change Program Start Times . page 4 Review or Change Valve Run Times page 5 Use Manual Operations . page 6 Turn Off The Controller . page 7 Use The Rain Delay Feature . page 8 Use The Season Adjust Feature .
Lawn Sprinkler User Manual Free Download. Irrigation Free Instruction Manual Download PDF.
page 8 Questions? Call Toro Customer Support 1-800-367-8676 Español Français 2 To Change Time and Day or Date 1. Turn the control dial to the SET TIME/DAY position. 2. To adjust the flashing portion of the display, press the +/ON or /OFF button. 3. Press the NEXT button. 4. Repeat steps 2 and 3 to set the currentminutes and day. Note: If the Odd/Even day option is used, continue repeating steps 2 and 3 to set the current year, month and day. 5. Return the control dial to the AUTO / ON position. To Review or Change Watering Day Schedule Calendar Schedule 1. Turn the control dial to the SET WATERING DAYS position. 2. Set the PROGRAMS switch as necessary to select the desired program. 3. Press the +/ON or /OFF button as needed to select CAL. 4. Press the NEXT button. 5. To select the day (flashing), press the +/ON button. To remove the day, press the /OFF button. Repeat this step until only the desired watering days are shown. 6. Return the control dial to the AUTO / ON position. Interval Schedule 1. Turn the control dial to the SET WATERING DAYS position. 2. Set the PROGRAMS switch as necessary to select the desired program. 3. Press the +/ON or /OFF button to select Int. 4. Press the NEXT button. 5. To select the Interval day (17), press the+/ON or /OFF button. 6. Press the NEXT button. 7. To select the Interval start day, press the +/ON or /OFF button. 8. Return the control dial to the AUTO / ON position. Odd or Even Schedule 1. Turn the control dial to the SET WATERING DAYS position. 2. Set the PROGRAMS switch as necessary to select the desired program. 3. Press the +/ON or /OFF button to select Odd or Even. 4. Return the control dial to the AUTO / ON position. 3 Turning Off A Program 1. Turn the control dial to the SET WATERING DAYS position. 2. Set the PROGRAMS switch as needed to select the desired program. 3. Press the+/ON or /OFF button to select OFF. 4. Return the control dial to the AUTO / ON position.