Toro Owners Manual - 1 of 2
Toro Owners Manual - 2 of 2
From inside (document excerpt):
Reelmaster 5200-D & 5400-D Specifications* ® REELMASTER 5200-D, MODEL 03540 2WD OR MODEL 03541, 4WD TRACTION UNITS ENGINE RADIATOR FUEL CAPACITY TRACTION DRIVE GROUND SPEED TIRES/WHEELS/ PRESSURE Kubota® liquid-cooled diesel, 3-cylinder, 28 hp (20.9 kW) gross @ 3000 RPM, 25 hp (18.7 kW) net @ 3000 RPM. 68.5 cu. in. (1123 cm3) displacement. 10 gallon (37.9 liter) diesel fuel. REELMASTER 5400-D, MODEL 03543 2WD OR MODEL 03544, 4WD TRACTION UNITS Kubota liquid-cooled turbo diesel, 3-cylinder, 35 hp (26.1 kW) gross @ 3000 RPM, 31.5 hp (23.5 kW) net @ 3000 RPM.
68.5 cu. in. (1123 cm3) displacement. Mid-mounted radiator with industrial tube and fin construction; 7 fins per inch. 7.5 quart (7.1 liter) capacity. 2WD: Power to the front drive wheels is via a hydrostatic transmission coupled to a mechanical drive axle. 4WD: Toro® 4-Matic® on-demand 4-wheel drive, consists of drive shaft connected to mechanical rear drive axle. 0-10 mph (0-16.1 km/hr) transport; 0-4 mph (0-6.4 km/hr) reverse; 0-5 mph (0-8 km/h) mow. 26.5 x 14-12 front drive tires provide maximum traction ability while minimizing turf abrasion. 20 x 10-10 rear tires. All welded formed steel frame, includes three tie-down loops. Individual 7 ” x 1.75 ” (17.8 x 4.4 cm) drum type wheel brakes and parking brakes on front traction wheels. Hydrostatic braking through traction drive. Power steering with dedicated power source. Hour meter, speedometer, fuel gauge, temperature gauge, cluster gauge with glow plug and charge indicator lights, low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off). The Automatic Control Electronics, ACETM system allows precision timing and control of machine functions for maximum reliability. Available diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA LOGTM system allows mechanic to find intermittent problems. Power steering, adjustable seat position, single forward and reverse traction pedal, traction speed limiter, brake pedals, parking brake latch, ignition key switch, PTO switch, throttle, joystick control for cutting unit raise and lower, reel speed and backlap control knobs. 12 volt maintenance free battery, 530 CCA. Electronic control unit is a microprocessor-based, solid state control unit with diagnostic capabilities. Traction pedal, operator presence in seat, PTO engage or disengage safety interlock switches. Reel drive circuit is split into front and rear independent circuits. Hydraulic functions controlled by an integrated hydraulic control block. Reel speeds are manually adjustable between 300-2050 RPM (250 RPM in backlap). Equal geometry independent suspension arms with positive down pressure to each cutting unit, adjustable to five settings in eight pound increments. Deluxe high back suspension seat. Height 56 ” (142 cm); 81.5 ” (207 cm) w/ROPS 2,320 lbs. (1,054 kg) – 2WD 2,675 lbs. (1,216 kg) – 4WD Length (w/o baskets) 103.5 ” (263 cm) Wheel Base 58 ” (147 cm) Overall Width/Transport 87 ” (221 cm) Front Wheel Tread 70 ” (178 cm) MAIN FRAME BRAKES STEERING GAUGES DIAGNOSTICS CONTROLS ELECTRICAL & INTERLOCKS REEL SPEED CONTROL CUTTING UNIT SUSPENSION SEAT OVERALL DIMENSIONS WEIGHT* OPERATOR TRAINING VIDEO SOUND LEVEL HYDROLIC OIL CAPACITY SAFETY CERTIFICATION WARRANTY 2,330 lbs. (1,059 kg) – 2WD 2,685 lbs. (1,221 kg) – 4WD *Approximate, with 8-blade cutting units Standard Operator Training Video, Form No. 99-8366, demonstrates procedures for safe operation and daily maintenance checks of Reelmaster 5200-D or 5400-D mowers. This VHS cassette includes English and Spanish versions. 86 dB(A) under normal operating conditions. 8 gallon (30.3 liter). 2WD: optional seatbelt, 2-post ROPS or 4-post ROPS; 4WD: standard seatbelt, 2-post ROPS; optional 4-post ROPS. This product complies with the American National Standards Institute (ANSI B71.4 1999) and European Community specifications (CE Certified). Two-year limited warranty. Refer to the Operator’s Manual for further details. * Specifications and design subject to change without notice. Reelmaster 5200-D & 5400-D Specifications* (continued) ® 5 AND 8-BLADE CUTTING UNITS, MODELS 03527 AND 03528 TYPE WIDTH OF CUT HOC RANGE HOC & ROLLER ADJ. REEL CONSTRUCTION Five 21 ” (53 cm) wide welded reels, 5 ” (13 cm) diameter. Front or rear discharge. Fully interchangeable. 95 ” (241 cm) with five cutting units. 1/ 4 – 1 ” (6.4 – 25.4 mm) standard, 1/4 – 13/8 ” (6.4 – 34.9 mm) with optional high height of cut kit (P/N 83-5300). Front roller: adjustable in 3 increments. Rear roller: screw adjustable with bolt clamp lock. Fairway designed reels with high carbon steel blades. All welded construction. 5 ” (13 cm) diameter reels. Reel motors feature quick disconnect for removal/installation onto cutting unit. Opposed screw adjustment, replaceable bedknife mounted on a cast iron bedbar. Manually controlled variable reel speed. On-board backlapping standard. Model 03527: .62 – 1.17 ” (15.7 – 29.7 mm); 5-blade reel at 5 mph (8 km/h). Model 03528: .40 – .73 ” (10.2 – 18.5 mm); 8-blade reel at 5 mph (8 km/h). Front 3.0 ” (7.6 cm) Wiehle roller standard. Optional solid front roller. Rear roller 2.5 ” (6.3 cm) solid roller. REEL DRIVE BEDKNIFE/BEDBAR CLIP FREQUENCY ROLLERS ACCESSORIES Model 03516 03532 30707 Description Thatching Reels Grass Basket Kit Armrest Kit Model 03539 Description 4-Wheel Drive Kit Model Description Model 75-6690 83-5300 85-4750 Description Rear Weight Kit High HOC Kit; 3/4 ” – 13/8 ” (19-35 mm) Diagnostic Tool 104-3385 Comb Kit 94-819-SL Service Manual 104-3395 Front Roller Scraper Kit 82-6920 Front Scraper for High HOC 03521 03533 Leak Detector Kit Powered Rear Roller Brush 104-3395 Rear Roller Scraper Kit The Reelmaster 5200-D & 5400-D is manufactured in Tomah, WI ISO 9002 Certified Plant. * Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.