Toro Super 700 Bidding Specs Catalog - 1 of 3
Toro Super 700 Bidding Specs Catalog - 2 of 3
Toro Super 700 Bidding Specs Catalog - 3 of 3
From inside (document excerpt):
Super 700 Series These precision-engineered gear-driven sprinklers are an extremely popular choice for high performance at a terrific value. For all medium-to-large residential and commercial applications. Specifying Information S700XX XC XX XX Body P–Lawn C–Commercial HP–High-Pop S–Shrub Body Arc P–Part-Circle F–Full-Circle Nozzle 15–1.5 20–2.0 30–3.0 45–4.5 60–6.0 75–7.5 90–9.0 Angle SA–Standard Angle 25° LA–Low Angle 15° FA–Flat Angle 7° Optional Models Available S700-F-CKVL–Full-Circle Less Nozzle, with Check Valve S700-PC-CKVL–Part-Circle Less Nozzle, with Check Valve For Example: When specifying a Super 700 Series High-Pop Sprinkler with a 360° arc and #3.0 flat-angle nozzle, you would specify: S700HP-FC-30-FA 700 S700C Commercial S700P Lawn s S700HP High-pop Nozzle Specification s s O TOR O S700S Shrub TO OR O SU PE R s s s O TOR O s s s Radius: 21’52′ Flow Rate: .809.75 GPM Operating pressure range: 2575 PSI Recommended operating pressure range: 3560 PSI 21 nozzle variations: Standard angle — 25°, Low angle — 15° and Flat angle — 7° (1.5, 2.0, 3.0, 4.5, 6.0, 7.5, and 9.0 gallons per minute) Single rotating stream pattern Full-circle (360°) and adjustable part-circle (40°330°) models available Lockable arc adjustment Check-O-Matic models available Balanced precipitation rates 25% reducible watering radius Precipitation rate: .061.29 in./hr.
Lawn Mowing User Manual Free Download. Power Lawn Mower Free Instruction Manual Download PDF.
Stainless-steel riser sleeve — S700C Locking cap — S700C Exposed surface: 2 ” Cap diameter: 3 ” (high-pop, lawn and commercial models) Inlet Size: 3 /4 ” NPT female thread (high-pop, lawn and commercial) 1 3 /2 ” or /4 ” NPT female thread (shrub model) Trajectory: Maximum Height of Spray at 40 psi Standard Angle 25° 7’6 ” 8’0 ” 8’6 ” 9’0 ” 10’0 ” 10’6 ” 11’0 ” Trajectory Low Flat Angle Angle 15° 7° 4’10 ” 2’6 ” 5’4 ” 2’1 ” 5’2 ” 2’0 ” 5’7 ” 1’11 ” 5’5 ” 2’1 ” 5’6 ” 2’7 ” 5’5 ” 2’3 ” High-Pop 1 s Height: 16 /2 ” 3 s Body diameter: 2 /8 ” 1 s Pop-up to nozzle: 10 /2 ” s Weight: 8.7 oz. s Side inlet: 7 ” from top of sprinkler to center of side inlet Lawn Pop-Up s Height: 7 ” 3 s Body diameter: 2 /8 ” s Pop-up to nozzle: 3 ” s Weight: 4 oz. Commercial Pop-Up s Height: 7 ” 3 s Body diameter: 2 /8 ” s Pop-up to nozzle: 3 ” s Weight: 4.5 oz. Shrub 1 s Height: 5 /8 ” 3 s Base diameter: 1 /4 ” s Weight: 2 oz. 700 TO OR O SU PE R TOR O Bidding Specifications The full- or part-circle sprinklers shall be a gear-driven rotary type. Part-circle models shall be adjustable from 40° to 330°. The sprinkler shall be capable of covering _ feet radius at _ pounds per square inch pressure with a discharge rate of _ gallons per minute. Water distribution shall be via one modular nozzle mounted and locked onto a 13/8 ” diameter nozzle turret. Radius reduction shall be adjustable up to 25% by means of a stainless-steel radius adjustment screw, accessible from the top of the nozzle when the sprinkler is properly installed. (continued) SEPTEMBER 2000 Super 700 Series Bidding Specifications (cont.) The body and cap of the sprinkler shall be injection molded from ABS, a non-corrosive, impact-resistant, UVresistant, heavy-duty plastic material. The sprinkler shall have a plastic filter screen sized to prevent entry of foreign material to the nozzle. All components shall be removable from the top of the sprinkler case. The sprinkler shall have a singlepiece riser/body seal that regulates flushing during pop-up and retraction to clear any debris from around the riser, and a heavy-duty, stainless-steel spring to ensure positive retraction. The seal shall be a single piece injection molded from Santoprene, a synthetic rubber. The sprinkler shall be capable of accepting any one of 21 nozzles. The nozzles shall be color-coded and available in three trajectories. Rotation shall be accomplished by a sealed, oil-packed gear drive assembly isolated from the water supply and driven by a variable stator that maintains a constant speed of rotation with all nozzles. The variable stator shall require no adjustments when changing nozzles. The sprinkler shall employ a modular, interchangeable nozzle technology. Any individual nozzle shall be easily removed, installed and locked if field adjustment is required. A standard pop-up, non-commercial model shall be available with a check valve which shall maintain 10′ of elevation change.
Wikipedia’s page for Toro Company
Company Web Site: www.toro.com