Toro Owners Manual - 1 of 5
Toro Owners Manual - 2 of 5
Toro Owners Manual - 3 of 5
Toro Owners Manual - 4 of 5
Toro Owners Manual - 5 of 5
From inside (document excerpt):
Sand Pro /Infield Pro 3040 & 5040 Specifications* SAND PRO/INFIELD PRO 3040, MODEL 08703 Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves. 16 hp (11.9 kW) at 3600 rpm. ENGINE Displacement: 29.3 cu. in. (480 cc). Oil capacity: 1.75 quart (1.8 liter). Electronic ignition. Full pressure lubrication, oil filter. Base mounted engine and pump with 4 isolation mounts.
® ® SAND PRO/INFIELD PRO 5040, MODEL 08705 Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves. 18 hp (13.4 kW) at 3600 rpm. Displacement: 34.8 cu. in. (570 cc). Oil capacity: 1.75 quart (1.8 liter). Electronic ignition. Full pressure lubrication, oil filter. Base mounted engine and pump with 4 isolation mounts. AIR CLEANER SYSTEM Remote mounted 3-phase Donaldson® air cleaner. FUEL CAPACITY 5.0 gallon (18.9 liter) of unleaded gasoline. Direct driven hydrostatic variable displacement piston pump to 3 hydraulic motors for 3WD. Large, front mounted hydraulic cooler and TRACTION DRIVE fan. Foot pedal control, forward/reverse. Patented Series/Parallel hydraulic traction system keeps three wheels working together, virtually eliminates spin-outs. GROUND SPEED HYDRAULIC OIL TIRES/WHEELS MAIN FRAME BRAKES Infinitely variable 0-10 mph (16 km/h) forward; 4.3 mph (6.9 km/h) reverse. 5.0 gallon (18.9 liter) system capacity. Nylon reservoir to reduce corrosion. 10 (nominal) micron replaceable cartridge. Three 22 x 11.00-8 pneumatic tubeless tires on demountable, interchangeable wheels. Tire pressure: 4-6 psi (27.5 kPa). Tricycle vehicle with welded rectangular tubular steel frame construction. Rear engine placement. Dynamic braking through the hydrostatic transmission and hand actuated brake lever. Manual front wheel steering. 15 ” (38 cm) diameter steering wheel. Hydraulic power steering. 15 ” (38 cm) diameter steering wheel. Hand operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction forward/reverse speed. Front and rear hydraulic lift and lower contols. Gauges: hour meter. 12 volt battery, 15 amp., 300 CCA @ 0° F, 12 volt electric starter. Fender mounted ignition switch with key. Neutral interlock switch, seat switch, also provisions for light kit. STEERING Double lubed for life gearbox. Hand operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction CONTROLS/GAUGES forward/reverse speed. Rear hydraulic lift and lower controls. Gauges: hour meter. 12 volt battery, 15 amp., 300 CCA @ 0° F, 12 volt electric starter. SEAT High-back cushion seat w/drain hole. 4 ” front-back adjustment w/additional 1.75 ” mounting adjustment. (arm rests optional) ELECTRICAL Dash mounted ignition switch with key. Neutral interlock switch, FEATURES seat switch. Also provisions for light kit. SOUND LEVEL 87 dB(A) under normal operating conditions. DIMENSIONS Width 58 ” (147 cm) Length 67.5 ” (171.5 cm) Height 45.25 ” (114.9 cm) Wheelbase 42.75 ” (108 cm) GROUND CLEARANCE 6.0 ” (15.2 cm) WEIGHT Net weight (less fluids): 930 lbs. (421.8 kg). WARRANTY warranty and a lifetime Magnetron® warranty. * Specifications and design subject to change without notice. Two year limited warranty. Refer to the Operator’s Manual for further details. Briggs & Stratton® provides a two year commercial engine SandPro /Infield Pro 3040 & 5040 Specifications*(continued) QAS MOUNT ATTACHMENTS & ACCESSORIES (OPTIONAL) HYDRAULIC FLEX BLADE Front QAS, 36 ” (91.4 cm) width steel blade, 4 position settings raise, hold, lower, and float. Transport height: 8.5 ” (21.5 cm). Sand Pro 5040 only. Rear QAS, 3 brooms, 72.8 ” (184.9 cm) wide. Optional stiffer bristles/wing weight kit. Rear QAS, 72 ” (183 cm) width, with 5 rake sections, 27 prongs adjustable for depth and wear. Rear QAS, 76 ” (193 cm) width, with 5 rake sections and spring teeth for excellent floatation and minimal surface disruption. Rear QAS, 72 ” (183 cm) width, steel or coco drag mats, 2′ (61 cm) working surface, hydraulic raise/lower. Rear QAS, quick connect, hydraulic power, 2000 rpm fan speed (2700 cfm @ 81 mph). Rear QAS, 66 ” (168 cm) width, box plow and scarifier, 1.8 ” (4.5 cm) max working depth, spring loaded to allow relief if an obstruction is hit. Hardened carbide tips available for scarifier teeth. Rear QAS, 57.6 ” (746 cm) width, 1.25 ” (3.1 cm) max working depth, 2.4 ” (6.1 cm) blade spacing. Two independently floating units, with 12 spiker blades and 11 hold down fingers. Rear QAS, plastic molded box with tool holding pockets. ® ® GROOMING BROOM TOOTH RAKE SPRING RAKE DRAG MAT CARRIER SYSTEM DEBRIS BLOWER FINISH GRADER SPIKER UTILITY BOX MID-MOUNT ATTACHMENTS & ACCESSORIES (OPTIONAL) SCARIFIER/LEVELING BLADE Selectable depth from 0-1.5 ” (3.8 cm), 52 ” (132.1 cm) wide, transport height: 6.75 ” (17.1 cm). Manually adjustable with 7 detents to set engagement depth from ground level to 1.5 ” (3.8 cm) ground engagement. 52 ” (132.1 cm) width. SPRING TINES ADDITIONAL ATTACHMENTS & ACCESSORIES (OPTIONAL) MANUAL BLADE TURF TIRE STIFFER TIRE REMOTE HITCH HYDRAULICS LIGHT KIT SPEED LIMITER 40 ” (101 cm) width steel blade, transport height: 11 ” (27.9 cm), spring assisted for raising plow, optional 60 ” (152.4 cm) blade kit available. 22 x 11-8 22 x 11-8 with stiffer sidewall. 200 lbs. (90.7 kg) gross trailer weight/hitch load. 4.8 gpm (18.1l pm) flow @ 3400 rpm, 2500 psi (172 bar) relief setting, 10 hp (7.4 kw) hydraulic power. Two 37 watt headlamps, one mounted on front fork and one mounted on rear of machine. Infinitely adjustable and overrideable; provides increase in spring force to alert operator of speed. See product specifications manual for additional attachments.