Toro Owners Manual - 1 of 2
Toro Owners Manual - 2 of 2
From inside (document excerpt):
and Pro/Infield Pro 2020 Specifications* ® SAND PRO/INFIELD PRO 2020, MODEL 08884 ENGINE AIR CLEANER SYSTEM FUEL CAPACITY TRACTION DRIVE GROUND SPEED HYDRAULIC OIL TIRES/WHEELS MAIN FRAME BRAKES STEERING CONTROLS/GAUGES SEAT ELECTRICAL FEATURES SOUND LEVEL DIMENSIONS WEIGHT WARRANTY Vanguard , V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves 16 hp (11 9 kW) at 3600 rpm Displacement: 29 3 cu in (480 cc) Oil capacity: 1 75 quart (1 66 liter) Electronic ignition Full pressure lubrication, oil filter ® Double air filtration, standard engine air filter plus remote mounted 3-phase Donaldson air cleaner ® 4 25 gallon (16 1 liter) of unleaded gasoline Direct driven hydrostatic variable displacement piston pump to 2 hydraulic motors for 2WD Large engine intake hydraulic cooler Foot pedal control, forward/reverse Infinitely variable 0-11 mph (17 7 km/h) forward; 4 mph (6 9 km/h) reverse 3 gallon (11 4 liter) system capacity Nylon reservoir to reduce corrosion 10 micron (nominal) replaceable cartridge Three 22 x 11 00-8 pneumatic tubeless tires on demountable, interchangeable wheels Tire pressure: 4-6 psi (27 5 kPa) Smooth tire, sports field tire Tricycle vehicle with welded tubular steel frame construction Mid-engine placement Removable refuse box Dynamic braking through the hydrostatic transmission and hand activated drum brakes mounted on each rear wheel Manual front wheel steering 15 ” (38 cm) diameter steering wheel Hand operated choke, throttle, and hydraulic control for raising/lowering with float Foot pedal controls traction forward/reverse speed Gauges: hour meter High-back cushion seat w/drain hole 4 ” front-back adjustment w/additional 1 75 ” mounting adjustment (arm rests optional) 12-volt battery, 280 CCA, 12-volt electric starter Dash mounted ignition switch with key Neutral interlock switch, seat switch, parking break switch Also provisions for light kit 82 dB(A) under normal operating conditions Width 58 ” (147 cm) Length 76 ” (193 cm) Height 45 ” (114 cm) Wheelbase 41 25 ” (105 cm) Net weight (full fluids): 650 lbs (295 kg) Two-year limited warranty Refer to the Operator’s Manual for further details Briggs & Stratton provides a two-year commercial engine warranty and a lifetime Magnetron® warranty ® *Specifications and design subject to change without notice 79 Sand Pro /Infield Pro 2020 Specifications* (continued) ® ® SAND PRO/INFIELD PRO ATTACHMENTS & ACCESSORIES TOOTH RAKE, 08812 SPRING RAKE, 08813 WEEDER/CULTIVATOR, 08815 DOzER BLADE, 08821 DRAG MAT, 08850 72 ” (183 cm) width, with 3 rake sections, 27 prongs adjustable for depth and wear Adjustable trowels, drawbar position for variable aggressiveness Hydraulically raised for transport Weights available for drag sections 76 ” (193 cm) width, with 5 individual rake heads Hydraulically raised for transport 38 ” (97 cm) width, with 5 sets of double shovels Mounted close to rear wheels for improved ground following and reduced gouging Hydraulically lowered, spring raised Operates independently of Tooth Rake and Spring Rake 40 ” (102 cm) width, reversible blade Loop handle for blade control with either hand Transport lock-up with handle storage position Side-to-side flex design for improved ground following Optional 60 ” (152 cm) Blade also available 6 5′ x 6′ (1 9 m x 1 8 m) Keystone drag mat with transport stands Used in conjunction with Hitch Kit to drag greens and tees Description: Spiker consists of 2 units each with 12 spiker blades and 11 hold down fingers Each unit floats independently of the other and is hydraulically pressured into the ground and allowed to float up and down by means of a spring Blade: High carbon steel, 105 ” ( 26 cm) thick Special profile design for minimum disturbance of soil surface when spiking, 73/4 dia (1 9 cm) Specifications: Weight: 280 lbs (127 kg) Unit Working Width: 57 6 ” (146 cm) Working Depth: 1 25 ” (3 2 cm), max Working lbs /Blade: 23 1 lbs (10 5 kg)/blade Blade Spacing: 2 4 ” (6 1 cm) 22 x 11 00-8 Tire pressure: 4-6 psi (27 5 kPa) Consists of bar plow and scarifier Adept at light ground maintenance and grooming Hydraulically raised and lowered, with spring loading to regulate down pressure Dimensions: Weight: 200 lbs (91 kg) Length: 10 ” (25 cm) Width: 66 ” (168 cm) Height: 10 ” (25 cm) 2100 rpm fan generating 2850 cfm PTO drive with single B section drive belt Quick-attach with two pins and connect drive shaft Clutch: Lever engagement back side belt tensioner Weight 180 lbs (82 kg) The Sand Pro 2020 are manufactured in Tomah, WI ISO 9002 Certified Plant SPIKER, 08856 TURF TIRE, 95-5849 FINISH GRADER, 08867 CYCLONETM 1000 BLOWER, 08857 *Specifications and design subject to change without notice Products depicted in this literature are for demonstration purposes only Actual products offered for sale may vary in design, required attachments and safety features Consult your local Toro Distributor “Vanguard ” and “Magnetron ” are registered trademarks of the Briggs & Stratton Corporation “Donaldson ” is a registered trademark of the Donaldson Company **Must be used in conjunction with Finish Grader (08867) 80